S21 case, Designed for PETG (6.2 in model)

prusaprinters

<p>ATTENTION: this requires mirroring on the x axis.</p> <p>This is like the 20th version of this case for me. I am really happy with the fit. It should not require any scaling or adjustment. At least it doesn't on my ender 3 v2.</p> <p>The back of the case is just thick enough to protect the camera on flat surfaces.</p> <p>print with 5 perimeters at least. This avoids infill in thin sides which hurts quality.</p> <p>If you want to try something fun, print with no top or bottom layers and 5 perimeters. This lets the large flat section of the case show whatever infill pattern you chose. I usually go with at least 45% density and it is still stiff enough.</p> <p>This works great it PETG and doesn't need to flex much. I'd bet it would work with PLA but I don't have any to try it with.</p> <p>I also have a almost dimensionally accurate model of the s21 on my thingiverse page that I used as a cutting tool in my modeling software to make this case. scaled it up about 1.5% in length and it worked great for me.</p> Category: Mobile Phone