Räsvelg Canopy

thingiverse

The canopy from the Räsvelg 3" and 5" race quads comes with a built-in 7mm spacer that allows it to bolt directly onto a 2-layer 30.5mm stack, specifically designed for HS1177-style cameras without additional mounting hardware. #### Supported FPV Cameras: * The canopy is compatible with HS1177 / Foxeer XAT600M and RunCam Swift V1 cameras. This canopy does not fit the Foxeer Arrow, RunCam Swift 2, or RunCam Eagle due to a lack of nubs needed to snap into place. Installing the camera by drilling screws through the side of the canopy compromises its ability to absorb impact, leading to broken canopies and cameras. #### Supported Lenses: The canopy is designed for use with 14mm outer diameter lenses, featuring camera nub holes for 1.8mm and 2.8mm focal length lenses. Some 2.5mm lenses may also fit if they have an outer diameter of 14mm. #### Required Hardware: For installation, you will need M3 screws that are fairly long, depending on the thickness of the frame. The 3.5mm Räsvelg 3 uses 25mm screws in the front and 30mm in the back, so count on requiring 22mm + plate thickness in the front and 27mm + plate thickness in the rear. You will also need 4 M3 locknuts, 4 5mm M3 standoffs, and possibly some o-rings to space things out and provide a little damping. #### Where to Buy: Räsvelg kits are available at Falcon Multirotors' website: http://falconmultirotors.com/rasvelg.html. Professionally printed canopies are available from Phoenix 3D solutions, including nylon and TPU options: * Nylon: https://www.phx-3d.com/product-page/räsvelg-nylon-canopy * TPU: https://www.phx-3d.com/product-page/räsvelg-tpu-canopy #### License: The Garuda Race Canopy is licensed under the Creative Commons - Attribution - NonCommercial - Share Alike license. Please refer to https://creativecommons.org/licenses/by-nc-sa/3.0/us/ for full details. We are not lawyers, but here are some guidelines: * **NonCommercial** — You cannot sell printed canopies or make a profit when printing for others as a favor. * **Attribution** — You must credit Falcon Multirotors when sharing your remixes. Upload your remixes to Thingiverse with a title that makes it clear what you changed, and cite this thing under the Remixes section so others can find your awesome modifications (which covers credit and linking to the license). * **ShareAlike** — This means you need distribute your remixes under the same license.