RVJet air/speed brakes

thingiverse

Top and bottom airbrakes designed specifically for RVJet use with curved hood scoops. The parts are engineered to work seamlessly with Spektrun A7010 slim wing servos, although other servos may fit, they haven't been thoroughly tested. To complete the setup, you'll need one solid carbon rod from the RVJet package that helps hold the wing in place for the top airbrake, along with some 2 mm carbon rods for the hinges on the bottom airbrakes. Assembling and securing the top airbrake requires CA or epoxy. The bottom airbrakes will fit snugly into the curved hood scoops' pockets. Print two of these parts, one for each side. First, cut enough foam for the bottom front piece to fit tightly against the carbon tube support beneath the wing, then securely attach it with epoxy so the hood scoop sits flush on top. Once the bottom airbrakes are installed, cut just enough foam for the bottom trim piece to wrap around the airbrake. You can find a working video here: https://www.youtube.com/watch?v=V7xeao8JAJ0. Printer Settings: * Printer Brand: Solidoodle * Printer: Press * Rafts: Doesn't Matter * Supports: Doesn't Matter * Resolution: 0.2 * Infill: 15-25% * Notes: PLA was used for these parts due to its minimal shrinkage. ABS can be used, but you'll need to adjust for the expected shrinkage.