Rush Hour

prusaprinters

<p>A quick and easy printable version of the logic game Rush Hour.</p><p>Designed so it can be printed as quickly as possible, without the need for post-processing, maintaining a satisfactory slide of the pieces, and a good quality finish.</p><p>It is also designed to print well on the Prusa MK2S 0.35mm FAST profile, Prusa MK3S 0.30mm DRAFT profile, and Prusa MINI 0.25mm DRAFT profile, although it can be printed with a lower layer height at the cost of a longer printing time.</p><p>You can find the different starting positions online, for example you can generate a random one on <a href="https://www.michaelfogleman.com/static/rush/">this website</a>, made by <a href="https://www.michaelfogleman.com/rush/">Michael Fogleman</a> with his great work done about the game.</p><p>I've included a magnetic version and a version without magnets, in case you don't have magnets and want to save some printing time.</p><p>The magnetic version uses 72 5x1mm circular neodymium magnets. The magnets are a snap fit and should not move once inserted. I have used a wooden chopstick to help me insert them. You have to pay close attention to the polarity because once inserted they are very difficult to remove without damaging the printed part.</p><p>The board is included in two versions, one of them with hidden magnets in case you prefer to print it that way. In this case, you must place a pause (M601) on the first layer after 5.8mm to insert the magnets.</p><p>I've also included the model I used during design tests, as I found it very satisfying as a fidget, in case you want to print it to tinker with it or to test tolerances.</p><p>Finally, I want to thank <a href="https://www.printables.com/social/175176-katarn/about">Katarn</a> for his ideas and for printing some test versions with his magnets and printer.</p>