Rupee (optimized with custom supports)

prusaprinters

<p>The Rupee by Ashmonster is a nice looking Rupee, but I had trouble printing it: Printing it flat would result in curled edges, printing it standing on a side with a brim (yes, I tried that) didn't work either: It would tip over at around the halfway mark.</p> <p>So I created this remix:</p> <p>It's the standard Rupee .stl but with a secondary file with custom supports. These can be used to print the Rupee standing up and holding on the side.</p> <p>The custom supports need to be printed "as supports" in Cura and the Support X/Y Distance needs to be lowered to 0.2mm.</p> <h3>Print Settings</h3> <p><strong>Printer Brand:</strong></p> <p>Creality</p> <p class="detail-setting printer"><strong>Printer: </strong> <div><p>Ender 3 Pro</p></div> <p><strong>Rafts:</strong></p> <p>No</p> <p class="detail-setting supports"><strong>Supports: </strong> <div><p>Yes</p></div> <p><strong>Resolution:</strong></p> <p>200</p> <p class="detail-setting infill"><strong>Infill: </strong> <div><p>20</p></div> <p><strong>Filament:</strong> purefil PLA</p> </p></p></p> Category: Coins & Badges