Runout Sensor for MK8 Extruder 1.75mm (same of Tevo Tarantula)

prusaprinters

A functional Runout Sensor to fits with MK8 Extruder for filament 1.75mm, just print and use it. You need enable it in firmware, I used Marlin 1.1.9, My board is MKS Base 1.4, this mainboard came with my Tevo Tarantula. This changes work to me, maybe it'll not works for you. Configuration_adv.h #define ADVANCED_PAUSE_FEATURE // I uncommented this line Configuration.h #define FILAMENT_RUNOUT_SENSOR // I uncommented this line #define FIL_RUNOUT_INVERTING true // And set this line to true pins_RAMPS.h //#define Z_MAX_PIN 19 // I commented this line #define FIL_RUNOUT_PIN 19 // And changed this from 4 to 19 I needed to change this lines in"pins_RAMPS.h" because inMKS Base 1.4 the pin 4 is not available, so I changed to pin 19 that is the endstop of Z+ this is not in use to me. So if you made this changes you'll need to connect the runout sensor at pin 19 (endstop Z+). Print Settings Printer Brand: TEVO Printer: Tarantula Rafts: No Supports: No Resolution: 0.2 Infill: 10% Filament: Unknown PLA Black Category: 3D Printer Parts