Runcam Thumb Pro mount

thingiverse

pursuit of perfect freestyle drone for runcam thumb pro-w camera led me to 2s 85mm drone, and two broken thumbs led to to making a custom case and mount. thx to internet dude for idea of mounting both thumb and fpv camera in the same casing at cult3d.com he goes by "CMHCADCAM" so, many iterations after it is still not done, but current version is yet to kill my thumb, so I guess it's semi-safe to use. On your own risk) case is basically waterproof, if sealed properly with t7000 or similar. do all the holes, including bolt holes and aroud lenses. fpv camera is simply glued inside. currently connector does not fit - I soldered the wires. I recommend applying t7k to naked camera, in a thin coat, case fit great then. all is left - is usb connector. basically I use electrics tape or t7k, or both Bolts - I used 2 longer one, and another one from broken thumb. so u need 3 long ones. good luck not sure if it's possible to print the case on fdp printer, you can try. I used mix of tough green and plane grey anycubic resin. print in such a way, so insides of the case have no supports it's 25 degrees the bottom part, lwwwrrs_2.stl, is supposed to be printed with tpu on fdm printer. oh, the fpv camera is foxeer pico ******************* UPDATE: lwwwrrs_v13.stl zzzzback_v13.stl ffrrrant_nd_v3.stl basically way sturdier tpu part, slightly longer and modified pokie-things on the case, added original ND filter holder. for good measure I applied a tiny drop of t7k on back of each filter's hook. that way it shouldn't come loose even in hard crashes. still, use on your own risk)