Runcam Split camera holder for QAV 180 / 210

prusaprinters

<p>This camera holder is for the Runcam Split camera (may also work with other cameras of the same profile), and should work for both a QAV 180 and 210 frame. The mounting hardware that came with the Runcam Split didn't work very well, so I designed this one. This design brings the camera forward a little bit. This is intended to be printed with a semi-flex filament. I used Sainsmart TPU and it works great. Anything softer (eg NinjaFlex) will probably not support the camera as well, and anything harder (eg PLA) may cause too much jello.</p> <p>When using your camera with the holder, you will still see some of the standoffs in the video if you fly at a steep angle. I am thinking about doing another version that moves the camera out past the standoffs so this will no longer be a problem (down side is the lens won't be protected).</p> <p>You'll need to use one of the small included screws (that comes the Runcam Split) in the bottom holes of the camera.</p> <p>Sample video footage here:<br/> <figure class="media"> <oembed url="https://www.youtube.com/watch?v=0MF9jcGSdZQ"></oembed> </figure> </p> <h3>Print instructions</h3><h3>Category: R/C Vehicles Print Settings</h3> <p><strong>Printer:</strong> Reach 3d</p> <p><strong>Rafts:</strong> No</p> <p><strong>Supports:</strong> No</p> <p><strong>Resolution:</strong> .20</p> <p><strong>Infill:</strong> 20%</p> <p><strong>Notes:</strong></p> <p>Use a semi-flex filament.</p>