RunCam HD2 Rubber Suit

thingiverse

My First Project with NinjaFlex... I've finally gotten around to protecting my Runcam HD2, so I ordered a sample of NinjaFlex. Thanks to some internet research, it worked flawlessly on the first try. The camera mount should be printed with flexible filament because it's quite tight. The supports can be made with PLA, ABS, or PET - it doesn't matter. The supports are pretty crash-resistant and should definitely be secured to the frame with a cable tie. I uploaded three models: 25° and 30° ZMR250, QAV220 (Lochabstand 28x45), and QAV190 (Lochabstand 34x43). If anyone is really interested, the supports can be quickly adapted to other frames. Ulimaker 2+ and NinjaFlex: Nozzle Temp: 233° Bed Temp: 40° (3DLAC, Hairspray No.5) Speed: 20-25mm/s (too fast will only cause problems) Fan speed: 50% from Layer 3 No retraction! Print Settings Printer Brand: Ultimaker Printer: Ultimaker 2 Extended Rafts: Doesn't Matter Supports: Doesn't Matter Resolution: 0.4 Notes: Ultimaker 2+ Material definition: [material] name=NinjaFlex temperature=233 temperature_0.40=233 retraction_length_0.40=0.00 retraction_speed_0.40=00.00 teperature_0.25=233 retraction_length_0.25=0.00 retraction_speed_0.25=00.00 temperature_0.60=233 retraction_length_0.60=0.00 retraction_speed_0.60=00.00 temperature_0.80=233 retraction_length_0.80=0.00 retraction_speed_0.80=00.00 temperature_1.00=233 retraction_length_1.00=0.00 retraction_speed_1.00=00.00 bed_temperature=40 fan_speed=50 flow=100 diameter=2.85 [material] name=PET temperature=248 temperature_0.40=248 retraction_length_0.40=4.00 retraction_speed_0.40=30.00 temperature_0.25=248 retraction_length_0.25=4.00 retraction_speed_0.25=30.00 temperature_0.60=248 retraction_length_0.60=4.00 retraction_speed_0.60=30.00 temperature_0.80=248 retraction_length_0.80=4.00 retraction_speed_0.80=30.00 temperature_1.00=248 retraction_length_1.00=4.00 retraction_speed_1.00=30.00 bed_temperature=70 fan_speed=0 flow=100 diameter=2.85