Runcam 5 (or 3) Mount for Diatone Taycan Cinewoop

prusaprinters

This is a partial remix but Thingiverse is not working with remixes currently so I will simply give credit here in the summary. It is partially based off of this model: https://www.thingiverse.com/thing:2334291 I will also message the original designer. I removed the strap portion of the above mount and added a tab which connects to my designed base which mounts to the Diatone Taycan Cinewoop frame (3" or 75mm) The base is printed in PETG or ABS and the runcam 5 mount is printed in TPU. The base is connected to the Taycan frame via 2mmx9 screws that are inserted into the forward mount screw positions on the frame. Prior to this the base has a twistlock that locks into the center forward slot on the top carbon fiber plate by inserting the twistlock part of the base print into the slot and rotating it into position to screw it down. The tpu camera mount is then connected to the base via a 2mm screw about 15mm to 20mm long with a washer. I used a 2mm washer and then a 3mm washer to distribute load well on the tpu mount's tab. The base holds a 2mm nut or locknut. It is important to print the base in the orientation I put the model in. Otherwise the twistlock could be too weak. I have the camera at a 25 degree position because the cinewoop is not a racing platform. Print Settings Printer Brand: LulzBot Printer: TAZ 5 Rafts: Yes Supports: Yes Resolution: 0.2 Infill: 50% Filament: Gizmo Dorks ABS Black Notes: Use ABS or PETG for the base, and TPU for the camera mount. Category: R/C Vehicles