Rubber band gun with Blowback action

cults3d

All STL files are fully printable and ready for use. No additional support is required to complete the prints. To achieve this, follow these steps: 1. Print Part 14 twice, flipping the part after each print to reveal the other side. 2. Print Part 22 twice as well, flipping it after printing to show the other side. In addition to the STL files, you will also need various hardware components for assembly. These include: * Ten 2mm x 10mm screws * Ten 2.5mm x 6mm screws * One 3mm x 10mm screw * A single 1.2mm x 15mm metal pin (to be cut using a 1.2mm RC push rod) * Another 1.2mm x 11.5mm metal pin, which should also be cut with the same tool * Two more 1.2mm x 19mm metal pins for use in assembly (also to be cut with the 1.2mm RC push rod) * A C-shaped metal rod that needs to be both cut and bent using the 1.2mm RC push rod To finish the assembly, you will need two rubber bands: one measuring half an inch in diameter, and another measuring one inch in diameter. For instructions on how to assemble the model, download the photo.zip file and follow the sequence of file names. If your printer can handle models larger than 200mm, consider using file 24.stl instead of files 20 and 21.stl for better results. To get a clearer understanding of the assembly process, watch this video: https://www.youtube.com/watch?v=bhU5X13fw6E