RSI Smartcap Power and Lights

thingiverse

I have installed lighting and power to my Smartcap. The system is set up with a 3 position (on - off - on) switch to control what works how. Position 1 (I on the switch) is on a magnetic switch and activates LED lighting on the roof when the rear glass is open. Technically you can add a magnetic switch on all 3 doors but I only wanted it on the rear. As soon as the rear door starts to open the lights come on. They go back off as soon as the door is closed. This position is ONLY for lights. Position 2 (0 on the switch) is everything off. Position 3 (II on the switch) is everything on, no magnetic switch. This position powers the LED lighting on the roof as well as a 12v port and USB charging ports. This will stay on until you kill your battery or switch it off. Parts list: LED Lighting: https://www.amazon.com/gp/product/B0978P6W1W but any 12v lighting will work Power Panel: https://www.amazon.com/gp/product/B07TBK58YS Replacement Switch: https://www.amazon.com/gp/product/B07MV5K2JV Magnetic Switch: https://www.amazon.com/gp/product/B07PRR33DF Wire Loom: https://www.amazon.com/gp/product/B002H97L4U Wire (Red): https://www.amazon.com/gp/product/B01M59NTTW Wire (Black): https://www.amazon.com/gp/product/B01M99C2FO Crimp Connectors: https://www.amazon.com/gp/product/B08BZ972B5 12v Relays: https://www.amazon.com/gp/product/B017VDI0GY Position 1 is connected to a single relay which powers the lights. Position 2 connects to 2 relays, one for lights and one for the power panel. This is done to prevent cross-powering the lights or panel. That wiring diagram is in the pics. I created a model for a 3D printer to house the switches and relays which is mounted to the side of the cap at the back. Also had to make a stand-off for the magnet side of the door switch so it would line up with the other half. Let me know what questions you have.