RPi 3.5" Touchscreen Case & Stand

thingiverse

Raspberry Pi 3.5" Touchscreen Case & Stand ====================================== I acquired this touchscreen for Raspberry PI, but it doesn't fit the OrangePi perfectly, and I don't want to mount it directly on the PI because I think it's probably not great for cooling. So, I designed this case for the touchscreen and a stand to mount it. This is not the final version, as I've had a few ideas along the way, so there will be a Version 2.0. If you need any of the hardware, it's very cheap; the bolts come in a box of many but it's great to have extra ones for other projects. I've linked the items below. # How to 1. Print the model 2. Put the screen in 3. Clean up holes with a drill if needed 4. Heat up the nuts and press fit them into the back of the lid 5. Put the bolts in and screw tight 6. If you want to mount it on the stand, skip step 5 for now Mounting it to the stand involves: 1) Putting four bolts on the inside of the lid 2) Placing bolts in the holes in the stand 3) Screwing the lid to the stand 4) Screwing the rest of the case to the lid **Also, if you want to mount it to anything else, the mounting holes are 3mm with 20mm spacing (from center to center)** # Hardware [3.5 inch TFT LCD Touch Screen](https://www.banggood.com/custlink/GD33d5L7QE) [M3 Bolts](https://www.banggood.com/custlink/m3Dmd5lTwE)