Royal Enfield Classic 500 Seat Spacers - For Aftermarket Seats
thingiverse
Royal Enfield Classic 500 Seat Spacers - For Aftermarket Seats(print 2 of each)15x6 (rear) and 15x4.5 (front) 8mm holeThe brackets are too wide and these bushes fill the gap.Fitting Notes:When fitting the rear seat leave all bolts loose until they are fitted through the bracket (with the rear frame off the bike) before finally tightening. Then fit the rear frame onto the bike.When fitting the front seat, loosely fasten the bracket to the bike using a 70mm coach bolt, [added a picture for reference] (I filed the hole to fit the square shoulder of the bolt) then lower the front seat into place through the bracket and tighten, fasten springs to bike frame.
With this file you will be able to print Royal Enfield Classic 500 Seat Spacers - For Aftermarket Seats with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on Royal Enfield Classic 500 Seat Spacers - For Aftermarket Seats.