Router Insert Plate with lift mechanism

prusaprinters

<p>This is a Router Insert Plate I made for my Dexter Router with a simple lift and lock mechanism.</p><p>I printed the board in carbon PLA because I needed it to be quite rigid and not flex.<br>I created two slots to insert two steel profiles 20mm wide and 4mm heigh to give more rigidity but I don't think it was necessary because with the carbon PLA it was quite stiff.</p><p>All remaining parts were printed on PETG.</p><p>Some parts need support.</p><p>The lifting mechanism must be printed lying on the bed to ensure greater strength of the piece.</p><p>Multiple hardware is required.<br>I used 4 M4 countersink screws to secure the router to the board.<br>4 M6x25mm coutersink screws to secure the plate to the plate levelers.<br>8 M6x20mm headless screws to level the board<br>1 M8x150mm screw for the lift mechanism<br>1 M8x70mm screw for the locking mechanism<br>1 M6x25mm screw for the locking bracket<br>4 M6x25 countersink screws for the locking mechanism and the steel cable support.<br>1 steel cable and steel cable locks</p>