Round Pot Shrooms

thingiverse

I modified the mushroom heads to work in vase mode and created a round pot with soil. I'm sorry for the mess, still new to 3D software (Blender). The problem is that Head.stl doesn't maintain its sizing, and I've forgotten why. To avoid this issue, I recommend getting the original file and scaling Head.stl to fit the desired size. Printing one at a time, starting with the largest and then the two smaller ones. I scaled the pot to ensure Z is 43.65. Below are the settings used on my Ender 3 Pro to print these items: After printing, I sprayed the mushroom heads with filler primer, sanded them, and applied another coat of primer for color consistency. The pot was also primed with standard primer to achieve the desired colors. To avoid travel time, I printed the stems close together in one print. Printing details include: * White PLA * Top 4 layers * Bottom 4 layers * Shells 3 * Layer thickness: .1mm * Infill, support, and rafts: 0% * Speed: 5200 The mushroom heads were printed in vase mode using wood PLA to maintain their natural color. Printing details include: * Wood PLA * Layer thickness: .15mm * Speed: 4800 The soil was printed with the following settings: * Wood PLA * Layer thickness: .2mm * Infill percentage: 15% * Speed: 5200 The pot was printed with the following settings: * White PLA * Top 4 layers * Bottom 4 layers * Shells 5 * Layer thickness: .2mm * Infill, support, and rafts: 0% * Speed: 5200