Roughcut Masterkey Backplate

prusaprinters

Back cover for masterkey, to cover up the big hole that you sawed off This is after doing the slamfire mod, pictures show where you need to saw off for this part to work. Hardware needed: 2 screws. Like those that you won't be using after sawing off 30% of the blaster Slamfire mod: https://www.thingiverse.com/thing:2662112 Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No Resolution: 0.2 Infill: 20% Filament: 3DAura PLA Black Notes: Print with "Make Overhang Printable" for a result similar to mine in the pictures Post-Printing ============= Step 0: Cleanup and Fit If you enabled "Make Overhang Printable", make sure to cleanup the holes first. The part will not be a perfect fit, so go ahead and use a heat gun to mould the part into the blaster if you want. Step 1: Drilling locate the two holes, then drill into the blaster. The holes drilled will be used to secure the part to the blaster itself Step 2: Screws just add screws to the holes on both sides of the blaster and printed part, and that's about it Category: Other