Rotating TurnTable ESP32-WIFI-WEB interface (28cm diameter)

prusaprinters

<p>First of all: this is a remake of the amazing: <a href="https://www.thingiverse.com/thing:4817279">https://www.thingiverse.com/thing:4817279</a></p><p>I first published it here: <a href="https://www.thingiverse.com/thing:4846512">https://www.thingiverse.com/thing:4846512</a> </p><p>I made the following changes:</p><ul><li>the table now is bigger : 28 cm of diameter</li><li>I used an ESP32 with WIFI</li><li>I made it an Access Point</li><li>you can access via AP and change: direction and speed</li><li>the switch is round</li><li>it is all fully enclosed with 18650 batteries that can be extracted and changes</li></ul><p>I know it is overkill using esp32, but it was there around doing nothing. the ESP has also a display which I am not using.</p><p>You can find also the *.ino file and the html.h one.<br/>I am not very good in HTML5 and css so if you can get it better let me know that I will update it.</p><p><strong>Print Settings</strong></p><p>Printer used:</p><p>Creality CR-10</p><p>Rafts: No</p><p>Supports: No</p><p>Resolution: 200</p><p>Infill: 20</p><p>Filament brand: Generic</p><p>Filament color: brown and than partially painted black</p><p>Filament material: PLA</p><p> </p><p><strong>Notes</strong>:</p><p>You need a large plate for printing the top which is 28 cm of diameter.<br/>at the same time it is important to have a flexible plate otherwise it will be very difficult to take it out given the large surface that touches the bed.<br/>I suggest 4 perimeters, using for the external one 95% flow and lower speed, in this way you have an amazing smooth result.</p>