Rotating table (DIY)

thingiverse

YT: https://youtu.be/JHodbw9yMg8 This time I builded rotating/presentation table - perfect for taking photos of small objects. Not perfect - but for amateur use is great. YT: https://youtu.be/JHodbw9yMg8 I hope that i dont forget about anything <(^_^<) ####################################### Printing settings: 0,4 nozzle 0,2 layer high 25% infill ####################################### Needed 3d printed parts: 1x 01_table 3x 02_support 3x 03_support_roller 1x 04_gear_small 1x 05_gear_big 1x 06_container 1x 07_cover 1x 08_bearing_holder 1x 09_adapter ####################################### Screws and others: 2x bearing 608zz (8mm x 27mm x 7mm) center of rotation 1x M8x70mm 6x M8 Nut 1x big M8 washer (or bigger) support roller 3x M3x20mm 3x M3 nut support 6x M4x12mm 6x M4 nut for assembly adapter 4x M3x12-16mm with flat-head cap screw 4x M3 nut for assembly bearing_holder 4x M4x12mm with flat-head cap screw 4x M4 nut stepper motor 4x M3x8mm with flat-head cap screw ####################################### Electronics: 1x Nema17 stepper motor 1x A4988 stepper motor driver 1x 10k liner potentiometer 1x cap for potentiometer 1x switch for direction (i used the one with lever) 1x switch for power on (the sliding one 1x ATtiny13A-PU microcontroller (it's easy to usesomething diffren, for example arduino nano (there is a lot of space under cover) 1x 12v power supply //// 1x condensator 0,33uF 1x condensator 0,1uF 1x condensator 100uF 1x 10k Resistor