Rotating Pill Bottle Storage Tower.

prusaprinters

<p>This is the first project done with the Prusa Mini+. It is a rotating holder for 24 33mm diameter pill battles with standard push on top. I use it to store small items used mostly in the maintenance of printers and the construction of different household projects.</p> <h3>Print instructions</h3><p>I printed in Galaxy Black PLA 25% infill however the turntable printed in PETG works better as it just snaps together and some PLA is too stiff to not break (slight application of heat solves this). The top knob has a slot in it for storing a pair of straight calipers for fishing small items out of the bottles.</p> <p>In the files there is one 235mm long bottle piece that can be printed on a larger printer (need 4). For smaller printers printing a top and bottom part is necessary for each six bottle side then glued together with superglue. Alignment of all parts is easily done and they can all be printed without supports.</p> <p>Glue the Top and Bottom bottle holders together then glue the four pieces to the bottom. Once dry the top can be glued on. The top knob can be glued to the top prior to this making sure to align the slot.</p> <p>I use 6mm Softair bbs for the turntable bearings but steel bbs could be used as well. Just fill the rail on the bottom turntable piece with bbs then pop the top on. (see my first paragraph note above on this) The small alignment print is to make it easy to center the bottom of the bottle holder on the turntable for easy gluing.</p>