Rotary Tool Holder with linear sliding table for PowerTool POW-X134 with vise

Rotary Tool Holder with linear sliding table for PowerTool POW-X134 with vise

thingiverse

Added the freecad project file so you can do changes. Not much to say. I searched for some cutting tables and tool holders for Dremellike rotary tools, but they where all a little weak so I decided to create a heavy duty one. It is a massive tool holder and works really good. Cutted 4mm hardened steel with it. The sliding table can be build with a feeder mechanism (M8 threaded rod, 4mm steel rod and a large spring) to slowly feed a work piece into a cutting disc or grinder. It is designed for an fairly old PowerTool POW-X134 Multi Tool. (Not the POW-X1341 !) https://www.powerplus.cz/files/navody/POWX134-R.pdf The sliding table uses very tight tolerances and the large round edge that connects with the base must be sanded until the slide moves freely without any stuttering. It also needs 1 MGN12 linear rail with a linear block. To use the feeding mechanism a long spring is needed, a 4mm steel rod and an M8 threaded rod. The threaded rod for the vise uses an M8 T-Nut on the inner side of the vise. It can't rotate and does the job. Melted some M4 nuts from the bottom into the holes of the sliding table to screw the vise and other stuff on it. I printed all parts as solid in PLA+ with a large Brim to prevent warping. If I remember correctly I used 20mm Brim for the big parts.

Download Model from thingiverse

With this file you will be able to print Rotary Tool Holder with linear sliding table for PowerTool POW-X134 with vise with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on Rotary Tool Holder with linear sliding table for PowerTool POW-X134 with vise.