Rostock Budaschnozzle Mount w/Cold End Fan Shroud
thingiverse
To install the Budaschnozzle on your Rostock Max, you'll need three 2.5-inch long 6-32 screws with nylon lock nuts, along with three 1.5-inch long threaded 6-32 spacers for each screw. Be cautious not to use standoffs larger than 0.25 inches, as they may interfere with the Budaschnozzle. For the fan mount, a 25mm x 25mm fan and #3 wood screws are required. Ensure the fan is no thicker than 10mm to avoid interference with the delta arms. If you're using a 10mm wide fan, consider cutting away the bottom two corners for clearance at extreme outer moves. Alternatively, a 5mm wide fan will provide ample cooling air and clearance for the Delta arms. More details are available at http://forum.seemecnc.com/viewtopic.php?f=54&t=1548.
With this file you will be able to print Rostock Budaschnozzle Mount w/Cold End Fan Shroud with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on Rostock Budaschnozzle Mount w/Cold End Fan Shroud.