Root 2 CNC Dust Shoe (52mm Spindle)

thingiverse

Root 2 CNC Dust Shoe (52mm Spindle)\nGreetings,\nGet your hands on a dust shoe attachment for the Root 2 CNC Machine, equipped with a 52mm Spindle. The shoe is printed in three separate parts to minimize filament waste. This detachable design allows users to remove the shoe and change the router bit at their convenience. The spindle collar attachment is extendable, paving the way for other innovative attachments like laser cutter mounts.\nThe vacuum collar is specifically designed for a 16mm tube, identical to the one used in this popular and affordable wet/dry vac on Amazon.\nParts Needed\nM2x10mm (Three)\nM2 Nut (Three)\nEpoxy / Superglue / Other Adhesive\nInstructions\nPrint the spindle collar\nPrint the downstem (print upside down)\nPrint the dust shoe\nAttach the spindle collar between the existing spindle clamps on your Root 2 CNC Machine\nSecure with Two M2 + M2 Nuts\nTest fit the downstem & check alignment with your spindle. If necessary, adjust the spindle position by loosening the spindle clamps and moving it up or down.\nTest fit the dust shoe in the downstem. You may need to use an exacto knife to shave some material from the inside of the down stem hole for a proper fit.\nOnce alignment is verified, attach the dust shoe to the downstem with epoxy, superglue, or another adhesive.\nAttaching / Removing\nSlide the dust shoe up the length of the spindle collet\nRotate the shoe / downstem so that the connector matches with the spindle collar.\nPress down to attach the dust shoe to the spindle.\nSecure the vacuum tube to the top of the downstem using the final M2 Bolt / Nut.\nBest regards, Tyler\nPrint Settings\nPrinter Brand: \n LulzBot\n Printer: \n TAZ 5\n Rafts: \n No\n Supports: \n Yes\n Resolution: \n 0.3\n Infill: \n 25%