"Room Racer" Micro Quad Frame (Scisky Edition)

thingiverse

This Micro Quad Frame fits a Scisky Flight Controller and is made for 8.5 mm brushed motors. Top and bottom are connected with M3 Nylon Spacers. The FC and the cam are mounted on double-sided 3M-Tape to reduce vibrations. The cam and battery are held in place with LOOM rubber bands. The frame weighs 12g (including Nylon Spacers). Print Settings: Printer: TEVO Tarantula Prusa i3 Rafts: No Supports: No Infill: 20-25% Notes: **Update**: A version was uploaded with exact 8.5mm motor mounts (room_racer_scisky_edition_85.stl). The base and the wall of the motor mounts were made a little thicker to strengthen the entire construction. It may be about 1 gram heavier. **Update**: Separate files were uploaded for the base (both versions) and the top-plate, which is the same for both versions: room_racer_scisky_edition_topplate.stl room_racer_scisky_edition_base.stl (9mm motor mounts; 2mm base thickness, 1.4mm wall thickness of motor mounts) room_racer_scisky_edition_85_base.stl (8.5mm motor mounts; 2.5mm base thickness, 1.8mm wall thickness of motor mounts)