Rook Evolution BLTouch adapter

prusaprinters

I used a clone, but the measurements should be the same.Shifted to reduce the Y offset as possible without blocking the part cooling fan.The nubs locate into the existing holes on the toolhead and you'll need a 5mm longer m3 bolt to pass through. In my case that meant moving from m3x45 to m3x50. Allows decent access to the bed, but can't reach all the way to x 0 or y 150.My probe offset is x=31, y=-25, z=0.500, but ymmv. Uses 2x m3 nuts and m3x6 screws