Rollbar Bracket for PiSugar Pi Enclosure

thingiverse

This is a bracket to mount the PiSugar case to a 1 5/8" Roll bar. https://www.thingiverse.com/thing:6399622It is designed to take 3mm hardware to mount the halves around the roll bar. Unfortunately, I sorta designed it upside down, so the bolts go up from the bottom and the nuts are on the top. This means that you'll have to mount it on the roll bar before inserting the Pi enclosure, as the bolts are too long to go in with the Pi in place. The bottom bar screws in with 2.5x40mm screws. I recommend using socket head screws, as the holes are quite tight and the screw is essentially tapping as it goes. I lined the top of the bottom bar, and the bottom of the main bracket with neoprene foam to cushion the clamping. There is a front and back to the main bar. It is tapered on the back to clear the fan opening on top of the case. This blocks the 2nd hdmi port on the pi, so this will not work if you are planning to use both hdmi ports. Recommend using right angle adapters for both hdmi and for the power in to the PiSugar, and secure them to the box with rubber bands, to both relieve strain on the connectors, and ensure they won't come unplugged at the worst possible time.