Rokid Max Short Nose Piece

thingiverse

Some Rokid Max owners, including myself have issues with the bottom of the image being cut-off because the included nose stems do not allow the glasses to sit low enough on the face. This replacement nose piece was designed to help alleviate that problem. Your mileage may vary, as every face is different, but in my case, this nose peice gave me the precious few extra millimeters that I needed to get the image perfectly centered, with all corners and edges fully visible. The file prints flat with no supports required using PLA. The nose piece is then bent into the final shape using needle-nose pliers and some hot water. Fine-tuning adjustments can also be made using the water and pliers in the same manner. Finish off by running it under cold water to set the adjustments. Our tap water runs fairly hot, so I was able to use tap water to heat the PLA. If the PLA doesn't become flexible after a few seconds under the tap, you may need to heat water a bit first. Either way be careful not to burn yourself. In my case, the PLA was never hot enough to burn, but the water was. A smidge of sanding or filing on the edges of the stem may be necessary to get it to insert into the slot on the glasses. You do want it to be snug though, so not too much. I have a video of this process, but Thingiverse doesn't support videos, so I've uploaded it here: https://youtu.be/tvNgKE3ItpU EDIT: Uploaded version of the STL with slightly longer stems for more flexibility. If you feel the default, one is too low and can't get it to the sweet spot just adjusting with hot water and pliers, try one of the longer stems.