Rockshox Manual Front Suspension Lockout Switch

prusaprinters

<p>This is a replacement lockout switch for a front suspension Rockshox fork.</p> <p>My fork is a coil fork, so I don't know if it works with their air forks.</p> <p>It was attached with a sheet metal/wood coarse thread screw. An octagonal inset in the bottom mates to the fork, &amp; is used to actuate the lockout itself.</p> <p>My fork is a Rockshox Recon Silver, 100 mm travel, G2 geometry. I can't speak to compatibility on other forks. The crown geometry may not be the same, so the switch may not fit.</p> <h3>How I Designed This</h3> <p>Took dimensions off my own switch.</p> <p>I guessed the countersink angle to be 90 degrees.</p> <p>I optimized the switch to clear obstructions on the fork first &amp; to get a good fit with the octagonal piece. I then increased the wall thickness until it would run into the crown of the fork, to bolster strength.</p> <h3>Updates</h3> <p>25 Jun 17: Octagon feature is too big. Want nominal 9.5 mm circumscribed circle for a looser fit, 9.4 mm for an ideal (tight fit). You'll have to press the switch on if you choose 9.4 mm. CAD will be 9.4 mm</p> Category: Replacement Parts