Rocket Scream Mini Ultra LoRaWAN enclosure

prusaprinters

Mini Ultra LoRaWAN EnclosureA 3D printable enclosure has been created to house the Rocket Scream Mini Ultra LoRaWAN device with pin headers and battery holder installed. The enclosure may need to be modified if additional hardware/sensors/etc have been mounted. This has been tested with an SMA antenna mount on 868/915MHz devices.Assembly of the enclosure will require qty 4 x 20mm socket cap head M2 screws and qty 4 x M2 nuts.Two variations are available: one three-part model which includes a gasket to help seal the enclosure, and one that can print without a gasket suitable for indoor use.Weatherproof gasketFor maximum weather resistance when mounting outdoors, print the following files in PETG:RocketScream_MiniUltraLoRaWAN_bottom.stlRocketScream_MiniUltraLoRaWAN_top.stlPrint the gasket model in a flexible filament such as TPU:RocketScream_MiniUltraLoRaWAN_gasket.stlIndoor useFor mounting indoors, print the following files in PETG:RocketScream_MiniUltraLoRaWAN_bottom_-_no_gasket.stlRocketScream_MiniUltraLoRaWAN_top.stlMountA simple mounting clip is provided for easy mounting to a vertical surface.RocketScream_MiniUltraLoRaWAN_mount.stl