Robot 2 iPhone Stencil Case

thingiverse

Here are the customized settings for the http://www.thingiverse.com/thing:58001 design: **Customized Options** Using these specific parameters, the result will be created. - **Pattern Overlap**: Set to 18 - **Case Width**: Calculated at 6.1 - **Pattern Radius**: Determined as 17 - **Tolerance Perimeter (4mm)**: Measured as .5 - **Rounded Corner Radius (4mm)**: Set at 8 - **Design Length**: Specified at 115.25 inches - **Image Scale Factor**: Calculated as 115 percent - **Width of Design Segment (5)**: Set to 6.17 mm - **Mashup Type**: Identified as number one. - **Total Width (4mm)**: Measured as 58.55 inches - **Height of Pattern**: Determined as 9.5 mm - **Thickness of Pattern Element**: Calculated at 5.0 units - **Pattern Rotation Angle**: Set to 13 degrees. - **Case Type Classification Number**: Identified as number one. - **Tolerance Case Height (4mm)**: Measured at .2 inches - **Height of Pattern Section (4)**: Measured at 7.6 mm - **Image Rotation Angle (inverted sign, because thingiverse rotation is opposite direction) 8 (-9)**: Determined as negative nine. - **Primary Color**: Defined as red. - **Thickness of a Design Element (5)**: Calculated to be .6 units. - **Height Tolerance Perimeter (4mm)**: Set at .2. - **Taper Ratio of Case Design (percent value)**: Specified at 3%. - **Design Style for the Specific Model iPhone**: Identified as version two. Note: There are multiple other options for modifying design aspects on Thingiverse's http://www.thingiverse.com/thing:58001 webpage that weren't utilized in this example. **The Final Results Are Displayed Here.**