ROBO3D Cable Chain (Install without removing wires) + Stepper Mo

pinshape

You no longer have to take out any wires to install this cable chain mod. The new design features 2 chain links with alternating open sides, a modified chain end that connects seamlessly to the Stepper motor mount for enhanced mobility, and another end without a top section. A new Stepper motor mount offers more space for wires and displays the distinctive "R" logo of Robo3D. Print Settings: Rafts: Not necessary Supports: Yes Resolution: 0.3mm Infill: 40% Notes: To print this mod, you'll need to produce 41 pieces. 19 chain links with an open bottom section, 19 chain links with an open top section, 1 longer end link with an open bottom section, a chain end with an open top section, and a Stepper motor mount. It's recommended that you print 2 or 3 extra open top and open bottom links, as they might break during assembly. Some support is necessary for the Stepper Motor mount. Additionally, due to the small area at the bottom of the chain links, a raft is suggested. You won't need to remove any wires, but part of the original black chain cable that comes with the printer will have to be removed. Leave about 8 inches of this cable intact before starting the cable chain I created (a picture is included). Use the screw holes on the end link or velcro, as I did, for secure attachment. Twist ties can also be used to keep everything in place; while not necessary, it's a good idea to double-check.