Ripsaw 1/32 Micro RC-Tank by WID

thingiverse

This is a printable micro RC-Tank 1/32 Ripsaw Style designed by WID. For best results print at 80-120 microns. All files are already prepared, print like it is in the file. Some of the parts need support. Everything printed in PLA. Print all the STL files. You’ll see on the File Name, what it is and how many parts of it are needed to print. Example: Ripsaw_Tensioner_(2).stl <- You need to print this part 2 times For the tracks: You need in total a 60-part track each side. Print for example 3x the 20 track for one side. You'll find more informations in the PDF in the files section. The PDF manual contains a list with all needed hardware, printing tips and a mounting instruction. In case you have any questions or you'd like to see new upcoming designs, look up "WID RC Design" on Facebook (https://www.facebook.com/groups/widdesign/) and join. I would be pleased to welcome you! I also added some Videos to this group where you'll find some informations about after-print-process with the tracks or how to put the bearings properly in the holes. I try to optimize my designs continuously to provide you the best experience. --> If you enjoy my designs please leave me a tip. :) Please respect the lincense. You're not allowed to use this for commercial use or changing the design. Please post a make and give an appropriate attribution. --- Update 30.10.2019: Added window frames and a lightbar-rack Update 03.11.2019: Added the "bearing-press", which is nothing else than a bracket that holds a M2-nut so you can use a M2 screw and a screwdriver to sink the bearings in the holes (instead of using a hammer). Update 04.11.2019: Added Motor-Gear v2 (will stop sliding gear in case it doesn't stuck on the motor shaft.)