Ring Stickup Camera Drill Sergeant Hat

prusaprinters

First things first. I can’t really take any credit for any of this model. The hat is an awesome model that I just made bigger and added some modifiers. The only reason I’m uploading it as a model is to make it easier for other ring owners to find it. You should post your ★★★★★ makes here on @MarekS page.Also, the hat insert comes from here: https://www.thingiverse.com/thing:2436415/makesIt‘s an absolutely stunning model that I shrank down.  I also added a solid bottom to it so I could use it as the insert. I got this idea from @Dragoon_322938 who has some very cool baseball cap designs. He also had a pretty great idea of a sizer (see more about that in the print instructions). I didn't use his sizer model because his license was too restrictive and I wanted to honor the licenses of the other designers. So, I created a fresh version of his model in fusion 360.  Print InstructionsNow before anyone @s me for the colors. I know they’re aren’t accurate. But it’s what I have on hand and it’s raining hard. I'll do some pushups later to atone for my sin. When I get the proper colors I’ll update the pics. Before you print this, I suggest you print the 65x65mm circle first (the inner diameter is 60x60mm). This will allow you to test the fit on your camera based on your printer and filament. The hat takes up 5mm of space at the top of the camera. The ring is half that at 2.5mm. Once you get that dialed in, just add revise the hat to fit your needs. If you size down, be sure to make the eagle smaller too. Now that that's out of the way, this was sliced in PrusaSlicer 2.6.1. Because I used modifiers it probably won't play nice with other slicers. Here are the print settings I used:For the HatFilament: Generic PETG (ASA/ABS would better though)nozzle: 0.4Printer profile: MK4 0.20mm SPEED with Input ShaperSupports: Organic - Be warned, my organic supports failed during the print while I wasn't around. however the MK4 somehow managed to recover and despite having a mess all over my build plate, the print still turned out. Infill: GyroidFor the Eagle InsertFilament: Generic silk PLA (would be better to use ASA/ABS for outdoor use) with a color change (even though it should be all gold) so I could see the eagle better. I'm planning to add a version with a color change for a blue ring around it for you 11B types. Nozzle, profile, supports (which don't matter) and infill (which also doesn't matter) are the same as above. ThanksA huge thank you to @MarekS for making the hat model this is based on. Please head to his page and clicking the ❤ button. Also, please upload your makes there and not here as he deserves the credit, but only if you think this is worth ★★★★★. I don't want him to get bad ratings for this model, so if you have any issues then please comment here and not his page. Another huge thank you to Altanbagana for the stunning Dollar Eagle Model.  What I've done with it here does not do justice to how beautiful that model is. Unfortunately, I couldn't find that model on Printables, but you can still give him some likes and makes over at his model page too.If you have any feedback that's not for these designers or regarding the sizing ring, please leave your comments here.  It's also okay to click the ❤ button here too, as long as you do the same for the other designers too. Please be sure to respect the original designers use licenses, both of which as of the time of publication are Creative Commons (4.0 International License) - Attribution.And finally, thank you to @Dragoon_322938 for the hat idea in the first place and for the inspiration for the sizer.