Ring Doorbell Mount

thingiverse

Update v2 -\nI increased the screw hole size for the Ring plate from 2mm to 2.5mm.\nI increased the distance between the screw holes from 7mm to 8mm\nI updated the files to indicate version "v2"\nThis mount is designed to work seamlessly with the Ring doorbell and 4.5" vinyl siding, excluding Dutchlap siding.\nThe mount fills the gap perfectly between the doorbell and siding.\nTo assemble, screw the mount to the siding first, followed by attaching the Ring doorbell to the mount.\nThe holes for the ring plate are now 2.5mm in diameter, allowing a #4 screw to be directly inserted into the mount.\nThe holes for the wall mount remain at 5mm in diameter and will accommodate a #8 screw.\nPrint Settings\nPrinter: Prusa i3 Mk2\nRafts: No rafts required\nSupports: Yes, only necessary for screw insets\nResolution: 0.2mm resolution\nInfill: Infill percentage set between 10-20%\nNotes: Simply lay the slant mount flat in your slicer and rotate it 9 degrees on the X-axis to ensure proper alignment.\nThe design was created using OnShape, a powerful CAD platform.\nTo edit this design, you can access it directly through OnShape.\nSlant Mount: https://cad.onshape.com/documents/4c0c2631be2c3a08d365bb35/w/38c14f613f4f98f5f3222fec/e/ed5c8f171147be59b535a479\nNo Slant Mount: https://cad.onshape.com/documents/584dc11df1b39010422a4938/w/7f5deb75cafcb2dcb2f53422/e/06edd6793dec85e55e4725cf