Rimfire Pistol Maintenance Stand

prusaprinters

<p>I designed and printed this after seeing that similar stands were $20 and still required a vise. I don't have a vise, so I took some measurements and made a stand that holds the gun up by the magwell. The tip of this sits on the mag release of my Mark 4 22/45.&nbsp;</p><p>This "should" fit any Ruger Mark 3 or 4 pistol, standard or 22/45, Browning Buckmarks and maybe the SW Victory. Let me know if this fits or doesn't fit something else and I will add/remove it from the list.</p><p>I will probably add a slip on cover that fits my other pistols in the near future.</p><h4>Print Settings:</h4><ul><li>Printed in Prusament PLA</li><li>215C</li><li>0.20mm</li><li>Quality preset</li><li>4 perimeters</li><li>7 top and bottom layers</li><li>25% cubic infill.&nbsp;</li></ul><p>Notes: Tolerances are 0.2-0.3mm so it's a somewhat snug fit. I would recommend printing each piece individually to reduce chances of edge lifting.&nbsp;</p><p><strong>PRINT FLAT ON THEIR SIDES</strong>, I don't think I have the STL orientation correct for printing, so you will need to change that or use my 3mf.</p>