Right Angle Scraper Spatula (for Cleaning Bird Feeder Tray)

prusaprinters

This is a simple right-angle scraping tool for cleaning debris out of the bottom outside tray of a bird feeder. It can be used for many purposes where there is limited space and where a traditional straight spatula or scraper might not fit.There are six options: three sizes based on the width of the tip of the blade, and two thicknesses (3mm max. and 4mm max.):-  15mm:     (50 min. print time; 4g/1.34 meter filament use @100% infill)-  22mm:     (56 min. print time; 4g/1.51 meter filament use @100% infill)-  29mm:     (62 min. print time; 5g/1.68 meter filament use @100% infill)  -  15mm - more rigid (4mm max. thickness, instead of 3mm max. of the originals)-  22mm - more rigid (ditto)-  29mm - more rigid (ditto)The handles are the same, except for their thicknesses. For improved grip, there is an indentation in one side of the handle for placing one's fingertips. The object files are laid out for right handed use. For left-handed use, print the object in mirror image. There is a hole in the handle for hanging up the tool, but it also can be a nice resting spot for one's pinky fingertip.The models require no rafts or supports and print with ease. I use 100% infill on almost all models that are intended to be tools (durable).Print SettingsPrinter Brand:CrealityPrinter: Ender 5Rafts:NoSupports: NoResolution:.16mmInfill: 100%Filament: Overture PETG White Notes: The object files are laid out for right-handed use (indentation for fingertips). For left-handed use, slice or print mirror image.Post-Printing =============With most 3D prints that are hand tools, I lightly sand most surfaces and edges to remove sharpness and to give a more 'frog skin' like texture for improved grip.   Category: Outdoor & Garden