Rick & Morty Butter Robot

thingiverse

UPDATE: Finally fixed some parts of this print, everything prints without supports except the wheels and just snip off the extra plastic. I turned the wheels around to get a nice finish on the front and the head, made it so the lens can be screwed on since I noticed different slicers made it hard for the old lens to fit in. New files are marked and ready for you. The light can be added easily with a blinking LED and battery - just check your local electronics store or eBay. What is my purpose? Here's a short video of the blinking light I added, was previously a bike helmet light: https://youtu.be/Np1iKPkuH44 I couldn't find a model that was in pieces so I made my own. Fully movable Butter Robot The acrylic lens was an idea to paint the inside then add resin or acrylic just enough to make a clear bubble. I designed his eye around a lens I had found but made a copy of it to paint. All the holes are designed for M3 screws, but I don't know their lengths as I used what I had in my loose screw jar. There are two versions of the head - one is hollow with a hole for the LED to add a blinking light as well as a possible voice box. For the wires, I recommend finding some thick wire to cut and fit otherwise I'll post a printable wire. The track is held in place by a lip that the wheels catch onto. Print Settings Printer Brand: RepRap Printer: Prusa i3 Rework Rafts: No Supports: Yes Resolution: .2 layer Infill: 10-20 Notes: Updated files can be printed without support except for the new wheels.