Rick and Morty ==Plumbus== Upside Down Hanging Version (Easy Print NO SUPPORTS!)

prusaprinters

<p>This is the upside down hanging version of my plumbus. <a href="https://www.thingiverse.com/thing:3325747">https://www.thingiverse.com/thing:3325747</a></p> <p>This prints very easily at .3 and will look even better at higher resolutions.</p> <p>below is copy and paste from my other plumbus</p> <p>Granted that this is very easy to print, but gluing is involved.. I made it in several parts so that you can print everything flat to the bed. It requires 2 colors of filament (or spray paint) or 3 if you print the stand. I printed this in PLA with .3 layers on an Anet A8.</p> <p>Print the grumbo with dinglebop and the grodus in skin color PLA and the chumbles and floob in pink. I printed the hanger in purple PLA</p> <p>For Scale the Grumbo is approx 4" in diameter(102mm) so this is not a tiny Plumbus</p> <h3>Print Settings</h3> <p><strong>Printer Brand:</strong></p> <p>Anet</p> <p class="detail-setting printer"><strong>Printer: </strong> <div><p>A8</p></div> <p><strong>Rafts:</strong></p> <p>No</p> <p class="detail-setting supports"><strong>Supports: </strong> <div><p>No</p></div> <p><strong>Resolution:</strong></p> <p>.3</p> <p class="detail-setting infill"><strong>Infill: </strong> <div><p>5%</p></div> <p><strong>Filament:</strong> generic PLA pink, skin and purple</p> <p><br/> <p class="detail-setting notes"><strong>Notes: </strong></p> </p><div><p>I printed the bottom and the Grodus ,Grumbo with Dinglebop together, and the Floob and Chumbles together.</p></div> Post-Printing ============= <p>Assembly</p> <p>To assemble the Chumbles, after printing break them apart and put them in the small disk with the grooves in it, then glue them together. Then insert the disk into the Grumbo and put more Chumbles around the disk. then drop some glue in the hole to keep everything together. After the glue sets, bend the Chumbles away from the center. I included 2 sizes of Chumbles, you choose which ones you want to use.</p> <p>To assemble the Floob and Grodus, align the 2 parts of the Floob and glue together, then glue the Grodus into the hole in the Floob. Glue bottom to the Grumbo and then you are done! you have your very own Plumbus!</p> <p>I used 3dGloop to glue this together, but super glue would work as well...</p> </p></p></p> Category: Props