Ribbon On World by Eleanor Cardozo

thingiverse

RIBBON ON WORLD BY ELEANOR CARDOZO https://www.myminifactory.com/object/3d-print-ribbon-on-world-55434 You may find the resource from the link above. I cut the model into pieces. There are 2 options for the legs, regular & with base( to support the legs in that orientation) If you print the legs standing up they fit very well. For the arms you'll need to trim off some portions of the mating surfaces of the arms, after that they will fit well and look good. With my orientation, body prints easily but you'll see some imperfections on her belly as that part faces the table, you may change the orientation based on the where you'll put her on the shelf, not too many options though. ABS may be another choice for the body to smooth that area. I haven't and won't print the globe but it's attached in the file section. If you are a FDM printer owner, don't scale it down. Print settings. Microzey PLA+ filament & Porima red PLA Parts are already orientated, use support where needed. Arms:0.16mm layer height for the arms, 0.12mm for the hands. 15% infill Legs:0.2mm layer h.15% infill, no infill might work as well. Body:0.12mm layer height, 0.08 for the tip of the head.15% infill Ribbon:0.2mm layer height, with some heat and speed adjustments for the stick for the last half of the print.15% infill I printed the legs with base, Twisted off the one for R one and used hot metal to round that area. As for L, you may keep it like that or print another base(attached) and insert the leg by using the bar under the toes.