Rey's NN-14 Stand and Screwheads

thingiverse

This is a display stand and some basic screw heads to complete Lillykill's NN-14 blaster. To get the blaster for this stand, go here - http://www.thingiverse.com/thing:1227111 The screw heads are a rough Torx format just to kind of match the single image I could find of the actual prop. You can use real screws of course, but why not just print them? They just super glue on and come in three sizes - Large for grip screws, medium for most other screws, and small for couple of small heads per side. From what I can find, the actual gun is the NN-14 manufactured by LPA, not the NN-44 based on fan sites. I couldn't find what LPA stands for, but in all honesty, I didn't look that hard. Note that this display stand is modeled for a 110% scale of Lillykill's model. If you print the NN-14 at 100%, you will need to scale this down. If you printed the blaster larger than 110%, then you'll need to scale it up appropriately. I would suggest scaling Lillykill's model even bigger than 110%. At 110%, the trigger guard is on the small side for an adult finger, and the hand grip doesn't fit the average hand. 115% or 120% may be a better option - if I re-print it, I'll print the handle and trigger piece at 120% to check for size. You'll need a printer with a print space of at least 110mm x 210mm and a height of around 75mm. I modeled the display stand with some random height surface blocks just for some visual interest to the stand. Print Settings: Printer: MendelMax 3 Rafts: No Supports: No Resolution: 0.25 Infill: 10% Notes: I printed it in PETG at 240C extruder, 75mm/s, 60C bed covered in 3DEeez, but whatever settings are good for you. Post-Printing: You could paint the letters in a contrasting color, but that's about it. How I Designed This: I imported Lillykill's model into Studio Max and then used some basic shapes to create the stand around it.