Rexing V1P Pro dashcam adaptors

thingiverse

At the time, V1P Pro Dash cams didn't come with suction cup mounts from Rexing. Instead, you had to stick them to the window or windshield using 3M tape. I came up with two adapters that let you use the suction mount from the V1, V1 3rd Gen, V1P for the back camera and the suction mount from the V1LG for the front camera. If you're upgrading your camera from either of those to the V1P Pro, you can still use the same mount. To make it work, I used a double-sided piece of tape to connect the adapter to the mount that came with the front camera. Then, the back camera slides into the adapter and connects to the suction mount. I also sprayed Rust-Oleum Universal Clear top coat on the adapters to help prevent UV effects from damaging the plastic. To print them, I used PETG filament, but any heat-resistant filament should work fine. I used 80% infill, but you don't need to go that high - 20% should be enough. UPDATE: I updated the back camera mount to increase the opening to 13mm, as the suction cup mount can vary slightly in size.