Revopoint Dual-Axis Turntable Holder for Nano Vise 2.0 and Nano Chuck / Revopoint DATT Halter für Nano Vise 2.0 und Nano Chuck

thingiverse

Here is an adapter for mounting the very popular miniature vice ["Nano Vise 2.0"](https://www.thingiverse.com/thing:5178901) as well as the ["Nano Chuck"](https://www.thingiverse.com/thing:5171097) by [PRima](https://www.thingiverse.com/prima/designs) (Remix of mdkendalls ["2,5 Inch Three Jaw Chuck"](https://www.thingiverse.com/thing:2670620/remixes)) on the Revopoint Dual-Axis Turntable. The holder can be attached to the turntable with two screws developed by [Whitehawk2000](https://www.thingiverse.com/whitehawk2000/designs) for his [scan plates](https://www.thingiverse.com/thing:5516293). To connect the holder and the ["Nano Vise 2.0"](https://www.thingiverse.com/thing:5178901) or ["Nano Chuck"](https://www.thingiverse.com/thing:5171097) you need an M8x8 cylinder head screw. I have designed and uploaded one if you don't have it. Print the adapter in STL orientation with 0.2 layer height, 15% infill and without support. Print the screw in 0.15 layer height, 100% infill and with no support if you print in STL orientation. ------------ I would be very happy if you have as much fun with the things as I do. ------------ If you like <a href='https://ko-fi.com/alvomane' target='_blank'><img height='36' style='border:0px;height:36px;' src="https://storage.ko-fi.com/cdn/kofi3.png?v=3" alt="If you like, buy Me a Coffee at ko-fi.com" title="Buy Alvomane a Coffee at ko-fi.com" /></a> :-) Thank you very much! --- German description --- Hier ein Adapter zur Befestigung des sehr beliebten Miniatur-Schraubstocks ["Nano Vise 2.0"](https://www.thingiverse.com/thing:5178901) sowie des ["Nano Chuck"](https://www.thingiverse.com/thing:5171097) von [PRima](https://www.thingiverse.com/prima/designs) (Remix von mdkendalls ["63mm Dreibackenfutter"](https://www.thingiverse.com/thing:2670620/remixes)) auf dem Revopoint Dual-Axis Turntable. Der Halter lässt sich mit zwei von [Whitehawk2000](https://www.thingiverse.com/whitehawk2000/designs) für seine [Scanplatten](https://www.thingiverse.com/thing:5516293) entwickelten Schrauben auf dem Drehteller befestigen. Für die Verbindung des Halters und des ["Nano Vise 2.0"](https://www.thingiverse.com/thing:5178901) oder ["Nano Chuck"](https://www.thingiverse.com/thing:5171097) braucht ihr eine M8x8 Zylinderkopfschraube. Ich habe eine solche Schraube konstruiert und hochgeladen, falls ihr keine habt. Druckt den Adapter in STL-Ausrichtung mit 0.2 Schichthöhe, 15% Infill und ohne Suppoert. Druckt die Schraube in 0.15 Schichthöhe, 100% Infill und ohne Support wenn ihr sie in STL-Ausrichtung druckt.