Revomaze Mapper Ver. 1

thingiverse

If you like what you see here, consider showing your appreciation with a tip. A newer version is available right now: Revomaze Mapper V2 Warning: You've been warned: Using this mapper will make most of the challenge in Revomaze puzzles pointless. Only use it once you've pulled out all your hair and are dealing with recurring Revomaze nightmares. A map maker for Revomaze puzzles. I was able to solve the Indigo maze in 8 hours using this mapper. This mapper flips the orientation of the maze horizontally and vertically, but the newer V2 Mapper corrects this issue. I used 2 M4 socket head cap screws, 2 washers, and 2 nylon lock nuts for assembly. Assembly: 1. Print the test piece and check the fit of your pen in the hole before printing the larger pieces. Make any necessary changes to the model and print all the pieces. 2. Insert one bolt, washer, and lock nut in the handle and leave the screw loose. Do the same for the map holder. 3. Place the handle on the side of the puzzle with the dot marker, aligning the gap in the handle with the serial number on the puzzle's core. Tighten the bolt with enough pressure to keep the handle in place, but not so tight that it breaks the plastic. This is a 3D printed part after all. 4. Cut a strip of paper 2" wide and place it on the map holder. 5. Slide the Map holder on the end of the Revomaze opposite the handle. 6. Rotate the handle until the space opposite the gap lines up with the dot on the puzzle. Hold the handle and puzzle still while rotating the map holder until the gap in the map holder lines up with the arm on the handle. Tighten the bolt, again being careful not to over tighten and damage the printed part. This alignment will indicate when the puzzle is in the solved position. 7. Place a piece of tape over the gap between the ends of the paper and trim the end. Make sure your pen will write on the tape you choose. 8. Cut a rubber band and tie loops in the ends. Place the pen holder on a ball point pen, and place the elastic loops on the hooks of the pen holder. 9. Hook the elastic under the arm of the handle and insert the pen. 10. Solve the puzzle!