Revolving phone stand

prusaprinters

<p>Simple table top phone stand with multiple “slots” each with different angle. Revolving mechanism is done with help of V-Slot wheel (you need one). Assembly with press-fit.</p><p>Shaft should be scaled down/up in your slicer to fit tightly into the wheel bearing - some tuning with razer/exacto knife might be required.</p><p>Uploaded model is for 10.7mm thick cell phone (with silicon case). V-Slot wheel dimensions 23.88 diameter, 11mm height and 5mm bearing inner diameter. If you need other dimensions use onshape - model is parametrised.</p><p><a href="https://cad.onshape.com/documents/f343dbb357b92777397910be/w/05361faebd90b87c3c16c9a5/e/6b5a2978b4df30739700f0b2">Onshape source model</a></p><p>Printed with PLA:</p><ul><li>0.8mm nozzle</li><li>0.4 layer (base), 0.2 layer (top)</li><li>30% infill</li><li>no supports</li></ul>