Revo Nozzle Holder

prusaprinters

<p>My design for a modular E3D Revo nozzle holder.&nbsp;</p><p>I wanted something that fitted to my printer (PrusaMK3s), wasn't too large, could take at least 3 nozzles and looked a bit funky.</p><p>Each clip will hold one Revo nozzle, and a short and a long clip pair will tile together. You can expand to include a home for as many or as few nozzles as you have.&nbsp;</p><p>There are three files;&nbsp;</p><ul><li>A pair of clips - long and short</li><li>A pair of clips - with attachment for a separate coloured hex insert</li><li>and a separate hex top insert</li></ul><p>There are .stl and .3mf versions of each.</p><p>The nozzles themselves are modeled up here: <a href="https://www.printables.com/model/293971-e3d-revo-nozzles">https://www.printables.com/model/293971-e3d-revo-nozzles</a>&nbsp;</p><p>The ‘back’ holders are 2mm taller than the front ones to give a staggered appearance, and the 2-part versions are each 1mm taller than their single-body counterparts. They are all interchangeable and will all tessellate together fine.&nbsp;</p><p>You will need to arrange the files for printing, but that should be pretty straight forward. I would suggest printing in pairs though. Everything prints fine without supports, and I did mine on a 0.2 layer height.</p><p>If you are doing the two colour variant, use a few drops of superglue to fix the hex insert in.</p><p>It would be cool to colour-match the hexagons to the Nozzle socks, but I didn't have yellow or green. Prusa orange looked the part for me though!</p>