Revised X-Axis Tensioner
thingiverse
This X-axis tensioner is a remix of http://www.thingiverse.com/thing:1683070 which is a nicely designed tensioner. For the AM8 frame application, that the frame was narrower by about 25mm. Locating the idler inside of the right X-axis carriage causes some bed area to be lost. Additionally, in my experience the small idlers with a bore fitting an M3 screw do not last very long. The small bearing can not take the load of a tight belt for more than 100 hours of operation. This tensioner addresses both issues. For this tensioner you will need the larger idler with a bore accepting an M4 screw. You will need a longer belt. The nuts should be “melted” into the body of the tensioners. For this you will need a 50mm screw to use as a tool.
With this file you will be able to print Revised X-Axis Tensioner with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on Revised X-Axis Tensioner.