Revel Aqua Color Paint Holder

thingiverse

I saw a rack for holding model paints the other week and thought it was a good idea. So I have designed one for the model paints I mostly use (Revel Aqua). The holder has capacity for 20 pots. When making, you will need to print SideA + SideB + Support as they are and also mirrored. You will require 4x swings (pot holder) and 8x SwingLink’s. You will also require 2 x Top (the other one is for the bottom). Assembly is quite easy. The sides are printed in two parts that dove tail together as they are too long for a typical Endor. Each of the paint holder swing trays requires a ‘link’ gluing to either end. Final assembly involves installing the top/Bottom rods into one of the sides (added some glue to keep it together), lying it on its side so the swings can be fitted, and finally fitting the other side to the top/bottom bars capturing the swings in place. Then just push the supports into to place. Job done. I printed in PLA at 190C with supports and 20% fill.