Reusable Carbon Filter with Pull Handles for Bambu Lab Printers
prusaprinters
A remix of @Tech with Kramer's activated carbon filter with the addition of pull handles you can use with your finger nails. Use @Ktech's slicer settings which is copied and pasted bellow for your convenience.Recommend to print in PETG or ABS/ASA for heat resistance.CHANGE SLICER SETTINGS TO THE FOLLOWING BEFORE YOU PRINT ! Quality 0.20mm Standard @BBL X1C (0.24mm should be fine too)SettingsQuality:Only one wall on top surfaces = OFF Strength:Wall loops = 5 or 6 (depends on infill pattern)Top shell layers = 0Bottom shell layers = 0Sparse infill density = 25% or higherSparse infill pattern = Aligned Rectilinear OR Triangles OR Honeycomb (AKA Bestagons) OR Grid. Infill/wall overlap = 20%Infill direction = 0 or 90 degrees Any infill that doesn't cover the holes basically all work, feel free to play around with the density with different patterns depending on your carbon pellet sizes.
With this file you will be able to print Reusable Carbon Filter with Pull Handles for Bambu Lab Printers with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on Reusable Carbon Filter with Pull Handles for Bambu Lab Printers.