Retrofit Nozzle wiper for mounting a Lulzbot Mini style bed wiper to a Taz or other printer

thingiverse

Here's the thing: first off, this is just a simple bracket designed to attach a Lulzbot mini style nozzle wiper, which you can get from their website at http://download.lulzbot.com/Mini/1.01/production_parts/printed_parts/wiper_mount_Mini/. Now, you'll need a couple of m3 heat set inserts, plus two pairs of M3 bolts that are 8mm long each. One pair will be used to secure the wiper itself, and the other pair will be attached to the bed. To make this work, simply drill a few holes in your printer's bed using the bracket as a guide, then tap them with an m3 bolt hole pattern or smooth them out for added convenience. Remember that there's extra material at the bottom of the notch on Wiper 1 that needs removal before use, so be sure to take care of this detail.