Retro TV case for Raspberry Pi 3b

thingiverse

Retro TV case based on a Toshiba Blackstripe I made for a Raspberry Pi 3b to run RetroPie and play cartoons. Designed to fit a Pi 3b with a 3.5 inch HDMI MPI3508 LCD display. Includes a "no-signal" custom splashscreen for RetroPie. In addition to the print you'll need: - Raspberry Pi 3b (might fit Pi 4 but I haven't tested) - 3.5 inch HDMI MPI3508 LCD display with HDMI crow connector (such as [this one](https://www.aliexpress.com/item/1005004358609772.html?spm=a2g0o.order_list.order_list_main.11.66c81802hHpPTF)) - Right angle micro-usb adapter (such as [these](https://www.aliexpress.com/item/4001270678080.html?spm=a2g0o.order_list.order_list_main.23.19a918024oIdZg)) to allow power cable to be connected from the back of the TV. Pi 3B uses the “down” version. - SD card with RetroPie (or whatever you want to run) - 4x M2.5x5 screws for the shell - 2x M2.5x8 screws for the antennae - 2x M2.5x8 screws for the base Optional: - 30mm 5V fan (such as [this one](https://www.aliexpress.com/item/1005002008354518.html?spm=a2g0o.order_list.order_list_main.17.75201802LDhD1a)) All parts except base, pi_case, and viewport should be printed with supports. RetroPie notes: I used the following values in my /boot/config.txt to reduce the display output to 4:3. overscan_left=-10 overscan_right=65 --------------------------------------------------------------------- __CHANGELOG__ Feb 13 2023 - Added USB adapter bracing tab to Base. Feb 3 2023 - Added speaker gaps to Front grill. Feb 1 2023 - Added 30mm fan mountable version of Back. - Added channel gap in Pi Case for fan wires. - Cut left side corners off Viewport for better fit. --------------------------------------------------------------------- Have fun!